QUALITY CONTROL EQUIPMENT LIST

 Dimensional Inspection

 Mitutoyo Linear Height LH-600 w/QM -  Data 100 Control

  • 1D/2D Height Gage
  • 0”- 38” vertical measuring range
  • Accuracy to 0.000043”
  • Resolution to 0.000001”


 Mitutoyo PH-A14 Optical Comparator

  • QM-Data 200 Control
  • 2D Coordinate Measurement Geometry Calculation System
  • 14” Screen
  • 10x Objective Lens and Fiber Optic Illuminator
  • X/Y Axis Workstage Resolution to 0.00005”
  • QM-Data 200 Control Resolution to 0.000004” 


  • Height Gage 24" w/Mitutoyo dial indicator


  • 48" x 36" Granite Surface Plate


  • 24" x 18" Granite Surface Plate


  • 24" x 30" Granite Surface Plate​


Thread Plug Gages go/no go:

  • 2-56, 4-40, 4-40 STI​, 6-32 (2), 6-32 STI, 8-32, 8-32 STI, 10-32, 10-32 STI,

           1/4-20 (2), 14-28, 3/8-16, 5/16-18, 1/2-13, 5/8-18, 1-14,M2.5 x 0.45, M5 x 0.8,

           M6 x 1.0, M8 x 1.25,M10 x 1.5, M12 x 1.75, 1/8-27 npt


Ring Gages go/no go: 4-40, 1/4-28, 6-32, 10-32


Mitutoyo Gage Blocks: 0.05, 0.100, 0.1005, 0.110, 0.120, 0.130, 0.150, 0.250, 0.500, 0.750, 1.0 (2), 2.0, 4.0 (2)


Meyers Gage Pins: 0.011 - 0.060, 0.061 - 0.250, 0.251 - 0.500  (For inpection use only)


Import Gage Pins: 0.501 - 0.625, 0.626 - 0.750, (For inspection use only)


0.375 Deltronics Pins 0.0001 increments 25pc


0.3125 Deltronics Pins 0.0001 increments 25pc


0.500 Deltronics Pins 0.0001 increments 25pc


Individual Deltronics Pins:
0.0700, 0.0702, 0.0704, 0.0705, 0.0706, 0.0708, 0.0781, 0.0783, 0.0786, 0.1169, 0.1173, 0.1175, 0.1177, 0.1180, 0.1220, 0.1240, 0.1245, 0.1563, 0.1568, 0.1570, 0.1573, 0.1962, 0.1964, 0.1967, 0.2350, 0.2354, 0.2358, 0.2362, 0.2365, 0.2369, 0.2539, 0.2544, 0.2549, 0.3142, 0.3145, 0.3148, 0.3149, 0.3152, 0.3155, 0.3159, 0.3164, 0.3169, 0.3425, 0.3426, 0.3428, 0.3434, 0.3917, 0.3922, 0.3927, 0.3930, 0.3933, 0.3936, 0.3940, 0.3943, 0.3947, 0.4712, 0.4716, 0.4720, 0.4723, 0.4725, 0.4727, 0.5897, 0.5900, 0.5904, 0.6290, 0.6292, 0.6295, 0.6299, 0.6302, 0.6306


Space Block Set 36pc


0-1" Thread Mics (5 pitch - 64 pitch anvils)

 The above are either N.I.S.T traceable or calibrated by Metroplex


  Metrology

  • Mitutoyo 0-1 Disc Type Micrometer
  • Mitutoyo 0-1 Digimatic Micrometer
  • Mitutoyo 12" Calipers
  • Mitutoyo 6" Calipers
  • 60" Vernier Calipers
  • 40" Vernier Calipers
  • Import Gage Pins: 0.011 - 0.060, 0.061 - 0.250, 0.251 - 0.500, (for shop use only)
  • Sine Plate
  • Angle Plate 6" x 8" x 6"
  • Angle Plate 8" x 10" x 12"
  • 1-2-3 Blocks (1set)
  • 3 Point Inspection Jacks

  The above calibrated by our inspection department.